Product Manual

bearings and clean the fork stem housing. If the

nut is too loose, the caster will flutter or shimmy. If

it is too tight, the chair will be difficult to steer.

Wheels - The large rear wheels should be checked

for correct tightness. If the wheel wobbles or is

loose, the bearings may ~e worn. The quick

release bolt may not be locked in place or it may

need to be adjusted. To check if the quick release

axle is locked in place, make sure the push button

is popped out and that the two small ball bearings

are protruding through the holes on the opposite

end of the axle. Do not attempt to adjust the quick

release mechanism unless you are qualified to do

so. Take the wheelchair to your local dealer for.

service.

Quick release mechanism - The quick release

mechanism should be checked for proper function.

The quick release should be cleaned and lubricated

(or replaced if necessary) if the push button does

not actuate easily or there is dirt/grime build up.

Frame - Check that the frame is not bent or

dented. Check the tubing for cracks and rust. If

such issues are found, take the wheelchair to your

local service dealer.

Clean and lightly oil the three rear axles on each

side of the frame to prevent rust. Plastic caps.

.."