Product Manual

Use and Safety:
To Open Chair - Open wheelchair by tilting to one
side and pushing downward on the seat rail until
fully open. Make sure the seat tubing rests
completely inside the seat cradles.
To Close/Fold Chair- Fold footplates to the vertical
position. Grab seat upholstery with both hands at
the front and back edge and lift up, or tilt chair to
one side and lift up on the seat rail.
Wheel Locks-Engage the wheel locks on both
wheels before entering the chair, leaving the chair,
leaning forward in the chair, or while being
transported in an elevator or a wheelchair lift. .
Check to make sure that the legrests do not unlock
the wheel locks when they are swung back.
When adjusted correctly, the wheel lock shoe
should be embedded into the tire at least 1/8" when
engaged in the locked position. Wheel locks are
activated by pushing the handle completely
forward. To adjust locks, loosen the nut on the
carriage bolt. Slide the clamp toward the rear
wheel until the lock shoe is embedded at least 1/8
inch into the tire when the handle is engaged in the
locked position. Tighten the nut and bolt to secure
in position. Inspect for correct locking action
BEFORE actual use.
8