Product Manual

Vital Signs Monitor User’s Manual
2-2
use battery to provide power to the monitor.
 To avoid explosion hazard, do not use the monitor in the presence of
flammable anesthetics, vapors or liquids.
 Do not open the monitor housings; electric shock hazard may exist. All
servicing and future upgrades must be carried out by the personnel
trained and authorized by manufacturer only.
 When using the monitor with electrosurgical units (ESU), make sure the
patient is safe.
 If you spill liquid onto the equipment or accessories, particularly if there
is a chance that it can get inside the tubing or the measurement device,
contact your service personnel. Please insure the measurement device and
its accessories dry during using electrosurgery and defibrillator.
 Do not come into contact with the patient during defibrillation. Otherwise
serious injury or death could result.
 Do not rely exclusively on the audible alarm system for patient
monitoring. Adjustment of alarm volume to a low level or off may result
in hazard to the patient. Remember that alarm settings should be
customized according to different patient situations and always keeping
the patient under close surveillance is the most reliable way for safe
patient monitoring.
 The physiological data and alarm messages displayed on the monitor are
for reference only and cannot be directly used for diagnostic
interpretation.
 To avoid inadvertent disconnection, route all cables in a way to prevent a
stumbling hazard. Wrap and secure excess cabling to avoid risk of
entanglement or strangulation by patient or personnel.
2.1.2 Caution
Caution
 To ensure patient safety, use only parts and accessories specified in this
manual.
 At the end of its service life, the monitor, as well as its accessories, must