User's Manual

Note: If you are using an infusion set with a needle, you do not need to
fill the cannula. Select Done when the system prompts you to continue
with the fill process.
To fill the cannula:
1. After you fill your tubing and insert your infusion set, the Fill Cannula? screen
appears.
Note: If your screen turns off before you are ready to fill your
cannula, press any button on your pump to turn it on again.
2. To fill your cannula now, select Fill. If you are using an infusion set with a
needle, you do not need to fill the cannula. Select Done to skip this step.
The Fill Cannula screen appears.
3. Adjust the Fill amount for your particular infusion set, and then select Fill
Now. If you are unsure about the fill amount, see the instructions that came
with your infusion set.
4. As the cannula starts filling, your screen displays the amount of units being
delivered. The pump beeps or vibrates when the delivery is complete.
106 Chapter 5
MP6025958-022 / A
RELEASED