User Manual

Programming Your Pump
43
2. Press ACT and the screen changes to
“SET VARIABLE BOLUS.” The word
“ON” is flashing.
3. Use the ▲
▲▲
▲ and ▼
▼▼
▼ buttons to select “ON”
or “OFF.”
4. Place the PPC near the Pump and com-
plete the communication. If “ON” was
chosen, the Variable Bolus option will
appear in the Main Menu / Bolus screen.
Set a maximum bolus
Your doctor will decide if you should use this feature. Setting a maximum
bolus amount will protect you from over-delivering insulin in case you
make a programming mistake.
1. From the “SETUP II” menu, press SEL
until the “MAX BOLUS” screen is dis-
played.
2. Press ACT and the screen will change to
“SET MAX BOLUS,” with the dashes
flashing.
3. Use the ▲
▲ ▲
▲ and ▼
▼▼
▼ buttons to enter a maxi-
mum bolus amount (0.0U to 25.0U), then
press ACT.
4. Place the PPC near the Pump and com-
plete the communication. The PPC screen
will automatically change to the “MAX BASAL RATE” screen and
then times out to the Time/Date screen if no further action is taken.
VARIABLE ON
BOLUS
SET
PPC
COMMUNICATING
MAX BOLUS
--
U
MAX BOLUS
--
U
SET
PPC
COMMUNICATING