User's Manual

Table of contents
15
PPC buttons
PPC programming information is entered using four buttons:
Communicating PPC
1. When commands are programmed the PPC
will talk to the Pump. When this occurs the
following screen will be displayed.
2. The word COMMUNICATING will blink to
indicate a communication is taking place.
Buttons Description
SEL Means SELECT. The SEL button allows you to step through and view
each of the option screens.
ACT Means ACTIVATE. The ACT button activates programming changes you
wish to make. As a safety check, you must press ACT to complete any
programming changes. You will always hear a single beep after you have
successfully activated a change.
UP
ARROW
Allows you to make changes to the screen settings by scrolling to higher
values. You must then press the ACT button for a change to be activated.
This button has a Sound Icon. When the “AUDIO BOLUS” feature is
turned on, the  button allows you to program an Audio Bolus.
DOWN
ARROW
Allows you to make changes to the screen settings by scrolling to lower
values. You must then press the ACT button for a change to be activated.
This button has a Light Icon which turns on the backlight. With the
display illuminated, you can program your Pump in dark areas. The
backlight remains on for 4 seconds after each  press.
PPC
COMMUNICATING