User's Manual

Table of contents
17
Set an immediate bolus (Variable Bolus option is “off”)
1. From the Time/Date screen, press SEL until
the “BOLUS” screen is displayed. The Time
and Date will be flashing, and the last bolus is
displayed.
2. Press ACT and “SET BOLUS” appears, and
the dashes or previous bolus under “IMM”
start flashing.
3. Use the  and  buttons to enter an
immediate bolus
amount.
4. Press ACT and the screen shows “CONFIRM
IMM.” If the number you entered for the
immediate bolus
is correct, press ACT to
confirm it. This value will now be
programmed into the Pump. If the number
was not correct, wait for the screen to return
to Time/Date and then repeat this procedure
to enter the correct value.
5. Place the PPC near the Pump to complete the
programming. The PPC will beep once and
display 0.0 units.
6. If the Alarm Feedback feature is “ON,” the
Pump will beep during each of the first five
strokes. The PPC will beep when the bolus
delivery is complete. Three segments of the
insulin delivery icon will be displayed and
will spin slowly during the bolus delivery. By
pressing SEL you can see the amount of insulin being delivered.
08:23 Jan 02
BOLUS
PROG
IMM EXT
10 U
_ _ U
_ _
SET BOLUS
IMM
_ _ U
CONFIRM
IMM
2.6U
PPC
COMMUNICATING
08:23 JAN 04
BOLUS 0.0U