User's Manual

Table of contents
22
10. Press ACT and the screen shows
“CONFIRM” asking you to confirm the
immediate bolus
, extended bolus, and time
duration.
11. If the numbers you entered are correct, press
ACT to confirm them. These values will
now be programmed into the Pump. If any
number is not correct, wait for the screen to
return to Time/Date and then repeat this
procedure to enter the correct values.
12. Place the PPC near the Pump to complete the
programming. The PPC will beep once and
display the amount of insulin being delivered.
13. If the Alarm Feedback feature is “ON,” the
Pump will beep during each of the first five
strokes.
14. The PPC will beep when the bolus delivery is complete. Three segments
of the insulin delivery icon will be displayed and spinning slowly during
the bolus delivery. By pressing SEL you can see the amount of insulin
being delivered.
Review the bolus history
You can review the bolus type, bolus amount, time and day of your last 512
insulin boluses.
1. From the Time/Date screen press SEL until
the “BOLUS” screen is displayed. The last
bolus value programmed and the time and
date will be flashing.
2. Press the  button once to display the
previous bolus and the time and date it was
delivered. Each additional  press will
display the next previous bolus delivery.
CONFIRM
IMM EXT
02:00
2.0U 2.0U
PPC
COMMUNICATING
08:23 JAN 04
BOLUS 0.0U
08:23 Jan 04
BOLUS
_ _
IMM EXT
PROG
_ _U_ _U