User's Manual

Table of contents
25
Set multiple basal rates
1. From the Time/Date screen press SEL until
the “BASAL RATE” screen is displayed.
Basal Delivery Pattern “A” and the current
Basal Rate appear. The word “NOW” also
appears and is flashing.
2. Press ACT and “1” appears to the right of
“A” indicating you will now program Basal
Rate “1” in Basal Delivery Pattern “A.” The
Basal Rate is flashing.
3. Use the  and  buttons to enter a new Basal
Rate.
4. Press ACT and the screen displays “SET
RATE”, indicating you will now program a
start time for Basal Rate “2” The time is
flashing.
5. Use the  and  buttons to enter a new start
time.
NOTE: In 24 hr. display mode, “00:00” indicates a start time
of MIDNIGHT. In 12hr. display mode, the screen will
read “12:00am.”
6. Press ACT and “SET RATE” and “2”
appears, indicating you will now program
Basal Rate “2” in Basal Delivery Pattern “A.”
The Basal Rate is flashing.
7. Use the  and  buttons to enter a Basal
Rate and start time for Basal Rate #2.
8. Continue this procedure until all desired Basal
Rates and start times are programmed. Then
press  and ACT.
9. Place the PPC near the Pump to complete the
programming.
BASAL RATE: A NOW
00:00 0.2U/H
BASAL RATE: A 1
SET RATE
00:00 0.2U/H
BASAL RATE : A 2
SET RATE
04:30 _ _U/H
BASAL RATE: A 2
SET RATE
05:00 _ _U/H
PPC
COMMUNICATING