User's Manual

Table of contents
26
10. The screen will calculate and briefly display
the total daily Basal insulin from the Basal
Rates you have programmed.
NOTE: To set multiple basal profiles in the other patterns (A,
B, C), select the pattern in Setup II menu and follow
the above procedure.
Set a temporary basal rate
A Temporary Basal Rate is often used when a brief change in basal delivery is
required, for example during exercise.
1. From the Time/Date screen press SEL until
the “TEMP BASAL” screen is displayed.
2. Press ACT and “SET DURATION” appears
with the Temporary Basal Rate duration
flashing.
3. Use the  and  buttons to enter a
Temporary Basal Rate duration.
4. Press ACT and “SET AMOUNT” appears
with the Temporary Basal Rate flashing.
5. Use the  and  buttons to enter the
Temporary Basal Rate, then press ACT
again.
6. Place the PPC near the Pump to complete the
programming.
NOTE: When your Pump is delivering a Temporary Basal
Rate, pressing SEL will display “TEMP BASAL.” This
will remind you that the Temporary Basal Rate feature
is currently active.
24 HOUR TOTAL
4.8U
TEMP BASAL
_ _ _ _U/H
TEMP BASAL
SET DURATION
00:30 _ _U/H
TEMP BASAL
SET AMOUNT
00:30 1.5U/H
PPC
COMMUNICATING