User's Manual
Table Of Contents
- List of figures
- CHAPTER 1 The Medtronic MiniMed 2007D Implantable Insulin Pump System
- CHAPTER 2 Safety features
- CHAPTER 3 Implanting the Medtronic MiniMed 2007D Pump System
- CHAPTER 4 Programming your Pump
- Introduction
- PPC screen icons
- PPC buttons
- Communicating PPC
- Main programming screen
- History
- Pump setup
- Auto off
- Pump Setup II
- CHAPTER 5 Alarms and messages
- CHAPTER 6 Warnings and precautions
- CHAPTER 7 Important Self-Care
- CHAPTER 8 PPC Care and Maintenance
- CHAPTER 9 Technical specifications
Table of contents
27
Stop a temporary basal rate
1. From for the Time/Date screen press SEL
until the “TEMP BASAL” screen is
displayed.
2. Press ACT and “SET DURATION” will
appear with the time flashing.
3. Press the button until the time is set to
dashes, then press ACT.
4. Place the PPC near the Pump to complete the
programming.
5. When the communication is finished, “SET
AMOUNT” will appear with the dashes
flashing. Allow the PPC to return to the Time/
Date screen or press ACT. The Temporary
Basal Rate is now canceled.
Personal events
This feature appears in the Main menu if it has been activated to "ON" in the
Pump Setup II menu. The Personal Event menu allows you to enter important
“events” during the day.
Preset events
You can enter the following preset codes for these popular events:
• 1 = meal
• 2 = snack
•3 = sick
• 4 = exercise
Additional events
Codes A, B and C can be used to record other events. Be sure to document the
events listed for A, B, and C.
NOTE: Events that happened in the past or present can be
entered.
TEMP BASAL
1.5U/H00:30
SET DURATION
PPC
COMMUNICATING
TEMP BASAL
SET AMOUNT
_ _ _ _U/H