User's Manual

Table of contents
33
The PPC will sound a long changing tone.
The PPC will vibrate.
The PPC will beep once.
The PPC screen displays all possible icons and numbers.
5. If your PPC and Pump “pass” the Self Test,
the display will change to “PPC PASSED/
PUMP PASSED.” After several seconds, the
screen will change back to the Time/Date
screen.
Basal delivery patterns
The PPC allows you to program three different basal delivery patterns (A, B,
C). Pattern A is preset at the factory. Patterns B and C can be programmed
from the “SETUP PUMP” menus. Each basal rate pattern can accept up to 48
different basal rates, one for each half-hour of the day. These are programmed
from the "Basal Rate" screen in the Main Programming menu.
Basal patterns can be used to follow your normal daily routines. For example,
separate patterns could be programmed for a typical work day, weekend day,
and travel day.
1. From the “SETUP PUMP” screen, press SEL
until the “DELIVERY PATTERN A” screen
is displayed. Press ACT.
2. Press SEL again until the “DELIVERY
PATTERN” screen appears. Press ACT and
the screen will change to “SET DELIVERY
PATTERN”.
3. Press the  and  buttons to select
pattern A, B or C.
4. Press ACT. Place the PPC near the Pump
and allow the communication to
complete.
PPC PUMP
PASSED PASSED
DELIVERY A
PATTERN
DELIVERY A,B,C
PATTERN
SET
PPC
COMMUNICATING