User's Manual

Table of contents
35
Pump Setup II
The “SETUP II” screen allows you to program additional features into your
PPC. Your doctor will normally program “SETUP II” features for you.
1. From the “SETUP” screen, press SEL until the “SETUP II” screen is
displayed.
Turn on the audio bolus feature
The “AUDIO BOLUS” feature allows you to deliver a bolus without looking
at the PPC screen. There are two step sizes you can select, 0.4U and 0.8U.
With each press of the  button, the PPC will beep one time (0.4U setting) or
two times (0.8U setting) depending on the delivery amount selected per key
press.
1. From the “SETUP II” screen, press ACT. The
“AUDIO BOLUS” screen appears.
2. Press ACT, and the screen changes to “SET
AUDIO BOLUS” with “ON” flashing.
3. Use the  and  buttons to choose “ON” to
turn on the Audio Bolus feature. Choose
“OFF” to turn the Audio Bolus off. Press
ACT again.
NOTE: If “OFF” is chosen, pressing the  and  buttons will
have no effect.
4. If “ON” was chosen, the “SET STEP AUDIO
BOLUS” screen appears, with a bolus amount
of 0.4U flashing.
5. Use the  and  buttons to choose a step size
of either 0.4U or 0.8U.
6. Press ACT and program the Pump. “AUDIO BOLUS” will now appear
on the PPC Main Menu.
AUDIO BOLUS
ON
0.4U
SET
AUDIO BOLUS
ON
0.4U
SET STEP
AUDIO BOLUS
ON
0.4U