User's Manual

LED Status Description What it means
Green LED shines continuously. Uploader battery is fully
charged.
Green LED blinks every second for three
seconds after the user presses the button for
one to two seconds.
Uploader is on.
Red LED blinks every second. Contact the 24 Hour HelpLine
for assistance.
Air travel
Turn off your uploader when boarding an airplane; it is an RF device and is not certified
for operation aboard aircraft.
Maintenance
Maintaining your MiniMed Connect Uploader
To maintain your uploader:
1
Moisten a clean, soft, lint-free cloth with a 70 percent solution of isopropyl alcohol, or
open a prepackaged 70 percent IPA wipe.
2
Gently wipe the outer surface of the uploader with the moistened cloth or wipe.
3
Let the uploader air dry, or wipe it dry with a soft, dry, lint-free cloth.
Warning: Do not use your uploader in water or wear it during water activities. The
uploader is not water-tight, and it may become damaged if it is used in
the water.
Caution: Dispose of the uploader according to the local regulations for battery
disposal (non-incineration).
FAQ and troubleshooting
Status messages
MiniMed Connect is a secondary display system only. For more detailed information on
pump messages and warnings, see your pump system user guide.
-18-