User Manual

Getting Started 31

5. Press the Up or Down arrow button to choose either ON or OFF or rEP (Repeat Function - See Next

Page). If you do not want to use this feature, choose OFF and the low glucose alert feature will be

turned off.

6. Press the ACT button.

7. If ON is entered, the current value will begin blinking.

8. Use the Up or Down arrow button to choose the value you want to set a low glucose alert. Press the

ACT button to save the chosen value. The value 65 mg/dl (3.6 mmol/l) has been entered in this

example.

NOTE -

Since it takes time for the Guardian RT to collect and measure glucose values, there is a

delay in triggering the alert. Ask your doctor which low glucose limit is right for you.

9. Press the ACT button to confirm the chosen value. The screen will go to the HIGH sub-screen. If you

would like, program the HIGH Limit as well. If not, press SEL 8 times to go to EXIT. Press ACT once

to go back to the HOME screen.

10. If you do not want to use this feature, repeat steps 1-4, and then use the Up or Down arrow button

to select OFF and press the ACT button. A CONFIRM screen will be displayed. Press the ACT button

once more to set, and the low glucose alert feature will be turned off.

LOW

LIMITGLUCOSE

SET

mg/dl

CONFIRM

mg/dl