User Manual

4
MiniLink charger
The MiniLink transmitter contains a non-replaceable, rechargable battery so you
can recharge your MiniLink as needed. Before using your MiniLink for the first
time, you should charge the battery fully. To maintain a short re-charging period,
charge the MiniLink after each sensor use. While the MiniLink will work more than
14 days without recharging, an empty battery can take up to 2 hours to recharge.
Installing a new charger battery
1 Unscrew charger battery cap.
2 Insert an AAA battery with flat (-) end first and screw on charger cap.
3 If battery is installed incorrectly or is bad, the charger will not work when the
MiniLink is attached. Repeat steps above using a new battery.