User's Manual
Table Of Contents
- © 2008, Medtronic MiniMed. All rights reserved.
- U.S., International, and foreign patent applications are pending.
- Paradigm® is a registered trademark of Medtronic MiniMed.
- MySentry™ is a trademark of Medtronic MiniMed.
- MySentry
- Contents
- Chapter 1: Introduction 1
- Chapter 2: Basics 9
- Chapter 3: Getting started 15
- Chapter 4: Everyday use 23
- Chapter 5: Maintenance 31
- Chapter 6: Specifications 33
- Chapter 7: Frequently asked questions 45
- Chapter 8: End user software license agreement 49
- Introduction 1
- Basics 2
- Getting started 3
- Everyday use 4
- Maintenance 5
- Cleaning the Monitor
- CAUTION:
- . Never place the Monitor directly in water.
- . Never try to clean the inside of the Monitor.
- . Use only a damp cloth and mild liquid soap to clean the Monitor.
- . Never use organic solvents such as lighter fluid, nail polish remover, or paint thinner to clean the Monitor.
- . Never use lubricants of any kind to clean the Monitor.
- CAUTION:
- Cleaning the Monitor
- Specifications 6
- Frequently asked questions 7
- End user software license agreement 8
- Index
MySentry Monitor
Introduction 3
NOTE: This user guide shows sample screens only. Your monitor screens may look slightly different.
Menu paths Displayed in bold text; for example:
Main Menu > Go to Utilities menu > Link to Pump
The previous instruction directs you to do the following:
1 From the monitor, go to Main menu, then select Go to Utilities menu.
2 In the Utilities menu, choose Link to Pump.
NOTE Provides additional information.
CAUTION Warns of a potential hazard which, if not avoided, could result in death or
serious injury. It may also describe potential serious adverse reactions and
safety hazards.
WARNING Notifies you of a potential hazard which, if not avoided, could result in
death or serious injury. It may also describe potential serious adverse
reactions and safety hazards.
Go to the...screen. When a step instructs you to go to a screen, the path to that screen is
included in the step.
For example:
Go to the LINK TO PUMP screen.
Main menu > Go to Utilities menu > Link to Pump
MySentry Monitor Referred to within procedures as Monitor.
MySentry Outpost Referred to within procedures as Outpost.
Convention Description