How-To Guide
Table Of Contents
- M998590A011DOC_A_FINAL_UserGuide_Part1_5
- Setting up CGM
- Using CGM
- SmartGuard Auto Mode
- About SmartGuard Auto Mode
- Before using SmartGuard Auto Mode
- Setting up SmartGuard Auto Mode
- SmartGuard Auto Mode Readiness
- Home screen with SmartGuard Auto Mode
- Using SmartGuard Auto Mode
- Safe Basal
- Block Mode when in SmartGuard Auto Mode
- Setting Temp Target
- SmartGuard Auto Mode sensor graph
- Enter BG
- SmartGuard Auto Mode Bolus
- Alert Silence
- Exiting SmartGuard Auto Mode
- Returning to SmartGuard Auto Mode
- M998590A011DOC_A_FINAL_UserGuide_Part2
2. Set the duration. The default is two hours and the maximum duration is
12 hours. Use
and to set the duration in 30-minute increments.
3. Select Start.
The screen shows Temp Target Started, and then changes to the Home
screen, where a banner shows the remaining Temp Target time.
When the Temp Target time runs out, the banner disappears from the Home
screen.
To cancel Temp Target:
1. Press
and select Cancel Temp Target to go to the Temp Target screen.
2. Select Cancel Temp Target.
The Temp Target will be canceled and the Home screen will appear, with no
Temp Target banner.
■
SmartGuard Auto Mode
SmartGuard Auto Mode 229