How-To Guide
Table Of Contents
- M998590A011DOC_A_FINAL_UserGuide_Part1_5
- Setting up CGM
- Using CGM
- SmartGuard Auto Mode
- About SmartGuard Auto Mode
- Before using SmartGuard Auto Mode
- Setting up SmartGuard Auto Mode
- SmartGuard Auto Mode Readiness
- Home screen with SmartGuard Auto Mode
- Using SmartGuard Auto Mode
- Safe Basal
- Block Mode when in SmartGuard Auto Mode
- Setting Temp Target
- SmartGuard Auto Mode sensor graph
- Enter BG
- SmartGuard Auto Mode Bolus
- Alert Silence
- Exiting SmartGuard Auto Mode
- Returning to SmartGuard Auto Mode
- M998590A011DOC_A_FINAL_UserGuide_Part2
If you use an Accu-Chek Guide Link meter, you can send your BG meter readings
directly to your pump. A confirmation screen appears for you to confirm the BG
value on the pump. Confirmed BG values are automatically used in the BG field of
the Auto Mode Bolus screen. The confirmed BG values are valid for up to 12
minutes after sending them to the pump. Confirm the BG meter reading from an
Accu-Chek Guide Link meter before you use the Auto Mode Bolus feature. If you
do not use an Accu-Chek Guide Link meter, you must manually enter your BG
value.
Note: Do not use a BG meter reading in the Auto Mode Bolus screen if
more than 12 minutes have passed since you have taken the BG meter
reading. That BG meter reading and the corresponding bolus amount
may no longer be accurate.
To use the Auto Mode Bolus feature:
1. Press
and select Bolus to go to the Bolus screen in Auto Mode.
2. If you use an Accu-Chek Guide Link meter, go to step 3. Otherwise, enter your
BG value. You can enter a value within the range of 20 to 600 mg/dL.
3. Enter your Carb amount in grams. If you choose not to enter a Carb amount,
go to step 4.
4. Select Next.
The screen indicates the amount of the calculated bolus.
5. Select Deliver Bolus.
A screen appears briefly to indicate the bolus delivery has started. Then, the
Home screen appears and shows the progress of the bolus delivery.
■
SmartGuard Auto Mode
SmartGuard Auto Mode 233