How-To Guide

• Always calibrate immediately after you check your BG. Never calibrate with a
BG meter reading taken more than 12 minutes earlier as that BG value would
no longer be considered valid.
• Always use clean, dry fingers when you check your BG levels.
• Use only your fingertips when obtaining blood samples for calibration.
Note: If your BG meter readings are significantly different than your SG
readings, wash your hands and calibrate again.
Disconnecting the transmitter from the sensor
Always refer to your transmitter user guide for instructions on disconnecting the
transmitter from the sensor.
Removing the sensor
Always refer to the sensor user guide for instructions on how to remove the
sensor.
Turning off Sensor Settings
You can turn off Sensor Settings at any time. If you disconnect the transmitter
from the sensor, turn off the Sensor Settings to avoid getting a sensor alert. Your
sensor settings remain in your pump. You cannot make changes to the settings
until you turn on the Sensor Settings again.
To turn off Sensor Settings:
1. Press
and go to the Sensor Settings screen.
Options > Utilities > Sensor Settings
2. Select Sensor.
3. Select Yes to turn off the sensor feature.
208 Chapter 10