How-To Guide

Title and text Type Explanation Next steps
Auto Mode
started
The following
SmartGuard
settings are now
turned off:
- Suspend before
low
- Suspend on
low
Alert Your pump has
started Auto
Mode. The
Suspend before
low and Suspend
on low settings
are now turned
off.
• Select OK to clear the alert.
• Allow your pump to complete
the transition into Auto Mode.
Auto Mode exit
X started. Would
you like to
review the Auto
Mode Readiness
screen?
Alert Your pump has
exited Auto
Mode because
you have turned
off your sensor, a
suspend event
message has not
been cleared
within 4 hours,
or you have
been in Safe
Basal the
maximum of 90
minutes.
This alert cannot
be silenced, and
is always enabled
whenever the
system is in Auto
Mode.
• Select No to clear the alert.
Select Yes to view the Auto
Mode Readiness screen.
• Check your BG.
• Calibrate your sensor.
• Follow instructions from your
healthcare professional and
continue to monitor your BG.
For details, see Exiting
SmartGuard Auto Mode, on
page 237 and Returning to
SmartGuard Auto Mode, on
page 237.
274 Chapter 13