How-To Guide
Table Of Contents
- M998590A011DOC_A_FINAL_UserGuide_Part1_5
- Setting up CGM
- Using CGM
- SmartGuard Auto Mode
- About SmartGuard Auto Mode
- Before using SmartGuard Auto Mode
- Setting up SmartGuard Auto Mode
- SmartGuard Auto Mode Readiness
- Home screen with SmartGuard Auto Mode
- Using SmartGuard Auto Mode
- Safe Basal
- Block Mode when in SmartGuard Auto Mode
- Setting Temp Target
- SmartGuard Auto Mode sensor graph
- Enter BG
- SmartGuard Auto Mode Bolus
- Alert Silence
- Exiting SmartGuard Auto Mode
- Returning to SmartGuard Auto Mode
- M998590A011DOC_A_FINAL_UserGuide_Part2
Title and text Type Explanation Next steps
Auto Mode min
delivery
Your SG has
been below
target for 2:30 hr.
Enter BG and
resume delivery
when ready to
continue in Auto
Mode.
Alert Your pump is
suspended, and
your predicted
SG has been
below target for
two and a half
hours.
• Select OK to clear the alert.
• Check your BG and enter it into
your pump.
• Follow instructions from your
healthcare professional and
continue to monitor your BG.
Note:
• The title of the alert appears the same as the previous Auto Mode min
delivery alert in the table.
• If you have suspended your pump, you will have no delivery. However, the
alert may still occur.
BG required
Enter a new BG
for Auto Mode.
Alert Auto Mode
requires a BG to
check the
reliability of the
sensor.
• Select OK to clear the alert.
• Enter a BG to return to Auto
Basal from Safe Basal, or to enter
Auto Mode from Manual Mode.
Bolus
recommended
For XXX mg/dL
entered, a
correction bolus
is recommended.
Select Bolus to
program a bolus.
Alert Auto Mode
calculated that a
bolus is
recommended
based on the BG
value that you
entered.
• Select Bolus to program a
correction bolus.
• Select Cancel if you do not want
to deliver a correction bolus.
■
Alarms, alerts, and messages
Alarms, alerts, and messages 277