Product Info
Table Of Contents
- M998590A011DOC_A_FINAL_UserGuide_Part2
- Troubleshooting
- Maintenance
- Product specifications and safety information
- Product specifications
- Alarm and alert escalation
- Altitude range
- Audio frequency
- Backlight
- Basal delivery
- BG Target
- BG meter value
- Bolus delivery
- Bolus Wizard feature default settings
- Bolus Wizard feature specifications
- Carb ratios
- Delivery accuracy
- Easy Bolus feature
- Environmental conditions
- Essential performance
- Filling the infusion set and cannula
- Infusion pressure
- Insulin delivery default settings
- Bolus settings
- Basal settings
- Insulin sensitivity factor
- Low Reservoir reminder
- Max Bolus
- Normal bolus
- Occlusion detection
- Percent temp basal
- Program safety checks
- Pump dimensions
- Pump memory
- Pump weight
- Sensor default settings
- Wireless communication
- FCC notice
- IEC60601-1-2:4th Edition notice
- Guidance and manufacturer's declaration
- Icon glossary
- Product specifications
- 670G Performance Data and Technical Information
• Do not use standard Luer sets with the MiniMed 770G insulin pump. Standard
Luer sets are not compatible with the pump. The MiniMed reservoirs and the
MiniMed infusion sets are specifically designed for use with the MiniMed 770G
insulin pump.
• Do not change or modify the MiniMed reservoir or the MiniMed infusion set
unless expressly approved by Medtronic Diabetes. Modifying the devices can
cause serious injury, interfere with your ability to operate the device, and void
your warranty.
• Do not rely on preset pump alarms or reminders alone to prompt you to
check your BG. This can cause you to forget to check your BG. Set additional
reminders on other devices, such as your cell phone.
• Do not change or modify the internal RF transmitter or antenna unless
expressly approved by Medtronic Diabetes. Doing so could interfere with your
ability to operate the equipment.
• Do not attempt to use any transmitter other than the Guardian Link (3)
transmitter with Bluetooth wireless technology (MMT-7911). "GL3" is marked
on the transmitter. Only the "GL3" transmitter can communicate with the
MiniMed 770G insulin pump with Bluetooth wireless technology.
• If other devices, outside those being used as part of the MiniMed 770G
System, employ radio frequencies such as cell phones, cordless phones,
walkie-talkies, and wireless networks, they may prevent communication
between the transmitter and the insulin pump. This interference does not
cause any incorrect data to be sent and does not cause any harm to your
devices. Moving away from, or turning off, these other devices may enable
communication. If you continue to experience RF interference, contact 24-
Hour Technical Support.
• Special Precautions regarding Electromagnetic Compatibility (EMC): This body
worn device is intended to be operated within a reasonable residential,
domestic, public or work environment, where common levels of radiated “E”
(V/m) or “H” fields (A/m) exist; such as cellular phones that are not paired with
the MiniMed 770G System, Wi-Fi, Bluetooth wireless technology, electric can
openers, microwave and induction ovens. This device generates, uses, and can
■
Before you begin
Before you begin 15