How-To Guide

To become familiar with the buttons and screens on your pump, see the
following sections in this chapter.
Unlocking your pump
Your pump automatically locks when entering sleep mode. When you wake up
your pump from sleep mode, you must unlock your pump before navigating to
the menu. When you press
, a screen appears and tells you to unlock your
pump. Press the highlighted button to unlock your pump.
The selected screen appears after you press the correct button. If you press an
incorrect button, the screen tells you to try again. If you press the
button, the
Home screen appears.
After your pump is unlocked, it remains unlocked until you re-enter sleep mode.
For information about the different power modes, or to put your pump to sleep,
see Power modes, on page 58.
Home screen
The Home screen appears by default after you change the battery, when you wake
the pump from sleep mode, and when you are not actively using another screen.
To see what your Home screen looks like if you use a sensor, see Home screen with
CGM in Manual Mode, on page 173.
To see what your Home screen looks like when you are in Auto Mode, see Home
screen with SmartGuard Auto Mode, on page 225.
■
First steps
First steps 43