User Manual

Delivering a bolus using the Easy Bolus feature
Initially, use the Easy Bolus feature while you look at the pump screen as you
count the tones or vibrations.
WARNING: Never rely on beeps or vibrations alone while using the
Easy Bolus feature. Always confirm your insulin delivery by looking
at your pump screen. When using the Audio or Vibrate options, it is
possible that an audio or vibration notification may not occur as
expected if the speaker or vibrator in your pump malfunctions.
Relying on beeps or vibrations while using the Easy Bolus feature
could result in over delivery of insulin.
To use the Easy Bolus feature, your pump must be in sleep mode. Your pump
automatically goes into sleep mode two minutes after the screen turns off. Press
and hold the
button for about two seconds to manually put your pump into
sleep mode.
To deliver a bolus using the Easy Bolus feature:
1. While your pump is in sleep mode, press and hold
for about one second.
After your pump beeps or vibrates, release
. You can now start to program
your bolus with the Easy Bolus feature.
Note: If your pump does not respond when you press , it may
not be in sleep mode, even if the screen is dark.
2. Press
the number of times needed to set your bolus amount.
Each time you press
, your pump makes a tone or vibrates, and your bolus
amount increases by the number of units set for the step size.
Note: You cannot use to select the Easy Bolus values. Pressing
cancels the Easy Bolus delivery.
■
Bolus
Bolus 109