User's Manual

SOCR System User Guide Page 22 of 27
Revision B April 2013 Medtronic Confidential
APPENDIX A – INSTALLING THE SOCR INVESTIGATIONAL
SOFTWARE
To use the SOCR Investigational Software with a Medtronic Model 2090
CareLink Programmer, the software must first be installed on a programmer
running Vision Release 2.5 or later. To determine the Vision Release on a 2090
programmer, select the Programmer icon from the main screen. Select Software
from the dropdown list. Verify the 2090 programmer lists Vision Release 2.5 or
higher. If the programmer release is not current or correct, ask your Medtronic
representative about updating the programmer software. The installation of the
SOCR Investigational Software only needs to be done once per programmer.
Installation requires use of a network connection to access the Medtronic
Software Distribution Network (SDN). The SDN uses a world-wide private
network to connect to servers. If you have not yet used SDN, you will be
prompted to enter in a Programmer Profile during the install. Follow the
Programmer Reference Guide provided with the Medtronic Model 2090 CareLink
Programmer to fill in this information. To install the Investigational Software
application on your programmer using SDN:
1) Contact the Medtronic Clinical Study Team to add your programmer serial
number to the approved SOCR Investigational Software list.
2) Turn the programmer’s power On. Connect the programmer to a network,
either wired, wireless, or dial-up.
3) Select the Programmer icon.
4) Select Software from the menu.
Approval date:
4.0
DSN009462
22-Apr-2013 16:05 UTC
Rev.