User's Manual
Table Of Contents
- Contents
- Introduction
- About your monitor
- Indications for use
- Contraindications
- Warnings
- Precautions
- Contents of the monitor package
- About the monitor
- Choosing a place to set up the monitor
- Setting up the monitor
- Sending information using the monitor
- Start-up screen information
- Reader LED indicator lights
- Troubleshooting error messages
- Traveling with your monitor
- Monitor care
- How to contact Medtronic
- Monitor specifications
20
• Place the monitor where you can sit comfortably
and see the front of the monitor.
• Place the monitor in a location that receives an
adequate cellular signal.
• Place the monitor within reach of a power
outlet, and position it so that it can be
unplugged from the power outlet if necessary.
• Do not place the monitor anywhere it could get
wet.
Setting up the monitor
Before you use the monitor you will need to plug
the monitor into a power outlet.
To plug in your monitor, locate the power cord
port on the left side of the monitor base. Insert the
power cord end into the monitor side port, then
plug the wall plug into a wall outlet.
Caution: Use only the supplied power cord with
this monitor. Using a different power cord could
damage the monitor and adversely affect your
safety.