User's Manual
Table Of Contents
- Contents
- Introduction
- About your monitor
- Indications for use
- Contraindications
- Warnings
- Precautions
- Contents of the monitor package
- About the monitor
- Choosing a place to set up the monitor
- Setting up the monitor
- Sending information using the monitor
- Start-up screen information
- Reader LED indicator lights
- Troubleshooting error messages
- Traveling with your monitor
- Monitor care
- How to contact Medtronic
- Monitor specifications
22
• Turn off or remove any cellular phone or other
wireless device that is within two meters
(six feet) of the monitor.
When you send a transmission using this
procedure, your monitor screen will also show step
by step instructions for you to follow. You can use
these on-screen instructions to guide you through
this procedure.
Note: If the monitor screen shows an error
message icon during this procedure, refer to
“Troubleshooting error messages” on page 31 of
this manual.
To send information using your monitor,
perform the following steps:
1. If the monitor screen is dark, press the “Accept”
button on the front of the monitor to wake up
the screen.
2. When monitor wake-up is complete, the
monitor screen will show an image indicating
that the monitor is ready to begin a
transmission.