User's Manual
Table Of Contents
- Contents
- Introduction
- About your monitor
- Indications for use
- Contraindications
- Warnings
- Precautions
- Contents of the monitor package
- About the monitor
- Choosing a place to set up the monitor
- Setting up the monitor
- Sending information using the monitor
- Start-up screen information
- Reader LED indicator lights
- Troubleshooting error messages
- Traveling with your monitor
- Monitor care
- How to contact Medtronic
- Monitor specifications
35
Note: The monitor reader should be replaced
when your reader battery no longer recharges, or
only holds a charge for a brief period. If you are
unable to complete a transmission without
receiving the Recharge Reader error message,
please contact Medtronic. See “How to contact
Medtronic” on page 40, or use the information
found on the back cover of this manual.
No cellular signal
Your monitor uses a cellular telephone connection
to transmit implanted device data to your doctor.
If your monitor does not have adequate cellular
service connection, the monitor’s screen will show
Error #5704 - No cellular signal. See Figure 7
• Change the orientation of the monitor by
rotating the monitor base.
• Change the location of your monitor so it is near
a window or outside wall. Remember, your
monitor should be placed within 3 meters
(10 feet) of where you sleep.
• If you are unable to find an adequate cellular
signal for your monitor, please contact