User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 How to contact Medtronic
- 3 What is the MyCareLink Relay home communicator?
- 4 Setting up the communicator
- 5 Optional: Connecting the communicator to WiFi
- 6 Checking the connection status
- 7 Sending a manual transmission
- 8 Troubleshooting
- 9 Indications for use and contraindications
- 10 Warnings and precautions
- 11 Additional information
- 12 Explanation of symbols
- 13 Specifications
- 14 Federal Communications Commission (FCC) compliance information
- 15 Glossary
5 Optional: Connecting the
communicator to WiFi
If you are having difficulty getting a cellular
connection (Section 8.1, “Cellular connection error”,
page 20), you can connect your communicator to
a WiFi network by performing the steps in the
following sections (Section 5.1 - Section 5.3).
Note: To see a short, step-by-step video, go to
www.MCLRelayWiFi.com.
Note: To get help from a Medtronic Patient Services
Specialist, call 1-800-929-4043.
5.1 Plug or replug the communicator
Plug the power cord into the communicator and into
a power outlet. If the communicator is already
plugged in, unplug it and plug it back in.
1. Insert the power supply cord end into the power
port on the back side of the communicator.
2. Plug the power supply wall plug into a power
outlet.
Printing instructions: doc #163256
Category: Size-selectable pkg
Size: 4.25 x 6.75 in (108 x 171 mm)
502752-211
10
M971931A001 A Medtronic Confidential Composed: 2018-10-25 10:52:03
PSJ - Size-selectable package manual 14-SEP-2018