User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 How to contact Medtronic
- 3 What is the MyCareLink Relay home communicator?
- 4 Setting up the communicator
- 5 Optional: Connecting the communicator to WiFi
- 6 Checking the connection status
- 7 Sending a manual transmission
- 8 Troubleshooting
- 9 Indications for use and contraindications
- 10 Warnings and precautions
- 11 Additional information
- 12 Explanation of symbols
- 13 Specifications
- 14 Federal Communications Commission (FCC) compliance information
- 15 Glossary
1. Press and hold the button for 2 seconds.
When the light ring starts to spin and a short
tone plays, release the button.
Note: If you press the button and the bottom of
the light ring flashes green 3 times with a 4 part
tone playing, the communicator is busy. Wait
and try again later.
2. The light ring continues to spin, and the
progress bar will start to fill in, indicating that the
data is being sent from your implanted heart
device to the communicator.
Printing instructions: doc #163256
Category: Size-selectable pkg
Size: 4.25 x 6.75 in (108 x 171 mm)
502752-211
17
M971931A001 A Medtronic Confidential Composed: 2018-10-25 10:52:03
PSJ - Size-selectable package manual 14-SEP-2018