User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 How to contact Medtronic
- 3 What is the MyCareLink Relay home communicator?
- 4 Setting up the communicator
- 5 Optional: Connecting the communicator to WiFi
- 6 Checking the connection status
- 7 Sending a manual transmission
- 8 Troubleshooting
- 9 Indications for use and contraindications
- 10 Warnings and precautions
- 11 Additional information
- 12 Explanation of symbols
- 13 Specifications
- 14 Federal Communications Commission (FCC) compliance information
- 15 Glossary
3. Stay within about 3 meters (10 feet) of the
communicator until all the bars in the progress
bar are lit.
When this process is complete, the light ring
and progress bar light up solid green. A short, 3
part rising tone plays.
Notes:
• The communication process typically
takes 3 to 12 minutes. Stay within range of
the communicator during this process.
• After the transmission is successful, you
can leave the area. The communicator will
send your implanted heart device data to
the Medtronic CareLink network where
your doctor or clinic can access it.
• If the progress bar does not fill completely
and a 3 part, descending tone plays, the
transmission was not successful. Go back
to Step 1.
Printing instructions: doc #163256
Category: Size-selectable pkg
Size: 4.25 x 6.75 in (108 x 171 mm)
502752-211
18
M971931A001 A Medtronic Confidential Composed: 2018-10-25 10:52:03
PSJ - Size-selectable package manual 14-SEP-2018