User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 How to contact Medtronic
- 3 What is the MyCareLink Relay home communicator?
- 4 Setting up the communicator
- 5 Optional: Connecting the communicator to WiFi
- 6 Checking the connection status
- 7 Sending a manual transmission
- 8 Troubleshooting
- 9 Indications for use and contraindications
- 10 Warnings and precautions
- 11 Additional information
- 12 Explanation of symbols
- 13 Specifications
- 14 Federal Communications Commission (FCC) compliance information
- 15 Glossary
8.2 WiFi connection error
• Error: The cellular and WiFi signal icons light up
orange, and the bottom segment of the light ring
flashes orange. The communicator plays an
error tone (1 high note and 1 low note).
• Cause: This error occurs if you previously
connected the communicator to WiFi, and there
is no connection available.
• Action: Unplug your Internet router and plug it
back in. Give the router time to start up, then do
the same with the communicator.
Ensure that the WiFi network name and
password have not changed. If they have
changed, follow the instructions in Chapter 5,
“Optional: Connecting the communicator to
WiFi”, page 10 to enter the new information.
If the error persists, try unplugging the
communicator and moving it to a place that
might get better cellular reception.
Printing instructions: doc #163256
Category: Size-selectable pkg
Size: 4.25 x 6.75 in (108 x 171 mm)
502752-211
21
M971931A001 A Medtronic Confidential Composed: 2018-10-25 10:52:03
PSJ - Size-selectable package manual 14-SEP-2018