User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 How to contact Medtronic
- 3 What is the MyCareLink Relay home communicator?
- 4 Setting up the communicator
- 5 Optional: Connecting the communicator to WiFi
- 6 Checking the connection status
- 7 Sending a manual transmission
- 8 Troubleshooting
- 9 Indications for use and contraindications
- 10 Warnings and precautions
- 11 Additional information
- 12 Explanation of symbols
- 13 Specifications
- 14 Federal Communications Commission (FCC) compliance information
- 15 Glossary
8.4 Enrollment error
• Error: The system error icon lights up orange,
and the bottom segment of the light ring flashes
green. The communicator plays an error tone (1
long note and 3 short notes).
• Cause: This error indicates that your clinician
has not completed your enrollment in the
Medtronic CareLink network.
It does not indicate an issue with your implanted
heart device.
• Action: Contact your clinic and ask them to
complete your enrollment.
Note: It can take up to 24 hours for the
communicator to update following your
enrollment. If the error continues and you know
that your clinician has completed your
enrollment, try unplugging and plugging in the
communicator.
Printing instructions: doc #163256
Category: Size-selectable pkg
Size: 4.25 x 6.75 in (108 x 171 mm)
502752-211
23
M971931A001 A Medtronic Confidential Composed: 2018-10-25 10:52:03
PSJ - Size-selectable package manual 14-SEP-2018