User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 How to contact Medtronic
- 3 What is the MyCareLink Relay home communicator?
- 4 Setting up the communicator
- 5 Optional: Connecting the communicator to WiFi
- 6 Checking the connection status
- 7 Sending a manual transmission
- 8 Troubleshooting
- 9 Indications for use and contraindications
- 10 Warnings and precautions
- 11 Additional information
- 12 Explanation of symbols
- 13 Specifications
- 14 Federal Communications Commission (FCC) compliance information
- 15 Glossary
networks. To set up WiFi when you arrive, follow the
steps in Chapter 5, “Optional: Connecting the
communicator to WiFi”, page 10.
How do I replace the communicator or power
supply?
If the power supply or communicator is lost or
damaged, contact Medtronic to order a
replacement. See Chapter 2, “How to contact
Medtronic”, page 5.
Communicator care
Do not drop the communicator on hard surfaces.
Dropping the communicator can damage it and
prevent it from functioning properly. If the
communicator has been damaged, contact
Medtronic. See Chapter 2, “How to contact
Medtronic”, page 5.
You can clean the exterior of the communicator by
using a clean, damp cloth with a light application of
water, hydrogen peroxide, alcohol (methyl, ethyl, or
isopropyl), or a mild detergent.
The communicator does not require any
preventative inspection or maintenance.
Precaution: Do not immerse the communicator in
water. If you get it wet and it stops working, contact
Medtronic.
Printing instructions: doc #163256
Category: Size-selectable pkg
Size: 4.25 x 6.75 in (108 x 171 mm)
502752-211
27
M971931A001 A Medtronic Confidential Composed: 2018-10-25 10:52:03
PSJ - Size-selectable package manual 14-SEP-2018