User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 How to contact Medtronic
- 3 What is the MyCareLink Relay home communicator?
- 4 Setting up the communicator
- 5 Optional: Connecting the communicator to WiFi
- 6 Checking the connection status
- 7 Sending a manual transmission
- 8 Troubleshooting
- 9 Indications for use and contraindications
- 10 Warnings and precautions
- 11 Additional information
- 12 Explanation of symbols
- 13 Specifications
- 14 Federal Communications Commission (FCC) compliance information
- 15 Glossary
13 Specifications
Standards
The communicator complies with the following:
EMC: CFR 47 Part 15
Patient Safety: IP21, IEC 60601-1, ordinary,
continuous operation, Class II, not suitable for use in
the presence of a flammable anesthetic mixture with
air or with oxygen or nitrous oxide.
Recommended environmental conditions
during storage
Temperature: −25°C to 70°C (−13°F to 158°F)
Relative humidity: 15% to 90% at 35°C (95°F)
Storage air pressure extremes: 70 kPa – 106 kPa
Recommended environmental conditions
during transport
Temperature: −25°C to 70°C (−13°F to 158°F)
Relative humidity: 15% to 90% at 35°C (95°F)
Transport air pressure extremes: 70 kPa – 106 kPa
Recommended operating conditions
Allow 2 hours prior to starting up the communicator
when transitioning from storage to operating
conditions.
Printing instructions: doc #163256
Category: Size-selectable pkg
Size: 4.25 x 6.75 in (108 x 171 mm)
502752-211
31
M971931A001 A Medtronic Confidential Composed: 2018-10-25 10:52:03
PSJ - Size-selectable package manual 14-SEP-2018