User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 How to contact Medtronic
- 3 What is the MyCareLink Relay home communicator?
- 4 Setting up the communicator
- 5 Optional: Connecting the communicator to WiFi
- 6 Checking the connection status
- 7 Sending a manual transmission
- 8 Troubleshooting
- 9 Indications for use and contraindications
- 10 Warnings and precautions
- 11 Additional information
- 12 Explanation of symbols
- 13 Specifications
- 14 Federal Communications Commission (FCC) compliance information
- 15 Glossary
Temperature: 5°C to 40°C (41°F to 104°F)
Relative humidity: 15% to 90% at 35°C (95°F)
Operating atmospheric pressure: 70 kPa – 106 kPa
Power supply
To ensure compliance to the specified standards,
use only the power supply that came with the
communicator, MENB1020A0502-XXX or
ADS012T.
• Rated voltage AC: 100 V – 240 V
• Rated line frequency: 50 Hz – 60 Hz
• Current: 0.5 A Max.
The power supply is to be used for mains
disconnection.
Expected service life
The expected service life is a minimum of 5 years. To
find out how to order a replacement, contact
Medtronic.
Safety and technical inspection
An annual safety and technical inspection of the
communicator is not required.
Printing instructions: doc #163256
Category: Size-selectable pkg
Size: 4.25 x 6.75 in (108 x 171 mm)
502752-211
32
M971931A001 A Medtronic Confidential Composed: 2018-10-25 10:52:03
PSJ - Size-selectable package manual 14-SEP-2018