User's Manual

1. Open the power supply connector cover located on the bottom edge of the patient connector.
2. Connect the power supply cord to the patient connector.
3. Plug the power supply into the AC power outlet (AC mains).
Warning: Use only the Medtronic-supplied power supply to power the patient connector. Use of an unapproved power supply may
damage equipment or impact user or patient safety.
2.6 Pairing the patient connector with the app
The patient connector uses a Bluetooth connection to communicate with the app running on the mobile device. You will need to pair
each patient connector to the mobile device.
1. Enable Bluetooth on the mobile device, if it is not enabled.
2. Open the app.
3. Follow the instructions in the app to continue.
4. Enter the patient connector model number, if you are prompted. The model number is located on the back of the patient
connector.
5. Turn on the patient connector by pressing the button when prompted by the app. The Bluetooth connection status light on the
patient connector flashes when it is being paired with the mobile device, and is solid when communication is established with the
mobile device.
6. When prompted by the app, select the patient connector you want to use from the list.
Printing instructions: doc #163256
Category: Size-selectable pkg
Size: 8.5 x 11 in (216 x 279 mm)
502386-031
14
M962083A001 C Medtronic Confidential Composed: 2016-08-16 12:05:16
XSL-Stylesheet J - Size-selectable package manual 24-MAY-2016