User's Manual
Table Of Contents
- Contents
- 1 Introduction to the 24967 Patient Connector
- 2 Setup and configuration
- 3 Conducting a patient session
- 4 Maintaining the patient connector
- 5 Electromagnetic compatibility declaration
3. Unwrap the blue weight from around the patient connector and fully extend the cord.
4. Remove the nose, the cable, and the weight.
5. Thread the cable with the weight through the hole in the nose.
6. Place the new nose on the patient connector and line up the screw hole.
Printing instructions: doc #163256
Category: Size-selectable pkg
Size: 8.5 x 11 in (216 x 279 mm)
502386-031
22
M962083A001 C Medtronic Confidential Composed: 2016-08-16 12:05:16
XSL-Stylesheet J - Size-selectable package manual 24-MAY-2016