User's Manual
Table Of Contents
- Introduction
- About your patient reader
- Indications for use
- Contraindications
- Warnings
- Precautions
- Contents of the patient reader package
- Battery installation
- Indicator lights and the standby button
- Downloading the application
- Bluetooth enabling between the patient reader and the application
- Security key code entry with the patient reader and the application
- Communicating with your implanted device
- Troubleshooting error messages
- Traveling with your patient reader
- Patient reader care
- Storing the patient reader
- How to contact Medtronic
- Patient reader specifications
- Consumer information and Requirements
M957944A001 Rev A Refer to the doc #xxxxxx for
Printing Instructions.
19
M957944A_ch.fm 4/11/14 10:31 am
5.5" x 7.0" (139.7 mm x 177.8 mm)
Medtronic Confidential
Starlight_Pat_R1.5
1. Locate the security key code on the device label on the bottom
of the patient reader on the left side of the security key
symbol.
2. Open the application.
3. Follow the prompts in the application and enter the security
key code.
Once these steps are completed, your patient reader is ready to
use with the application.
Communicating with your implanted device
Consider the following recommendations when using the patient
reader to communicate with your implanted device:
• Find a location where you can sit comfortably when the
patient reader is communicating with your implanted device.
1. Security key code
Figure 3: patient reader device label including the security key code
1
M957944A001.book Page 19 Friday, April 11, 2014 10:30 AM