User's Manual
Table Of Contents
- 1 Introduction
- 2 Important therapy information
- 3 Introduction to stimulation
- 4 Using your patient programmer
- How the patient programmer works
- Synchronizing and displaying the Therapy screen
- Guidelines for adjusting your stimulation
- Turning your neurostimulator ON or OFF
- Adjusting stimulation settings
- Patient programmer batteries
- Summary of keys
- Preferences: Changing the audio, contrast, and number format
- Using the carrying case and labeling the patient programmer
- Optional detachable antenna
- 5 Troubleshooting
- 6 Maintenance
- 7 Appendix A: Electromagnetic interference (EMI)
221244001 Rev X
7439_Ch04.fm 10/13/04 9:28 am
Size 4.625" x 6.0" (117 mm x 152 mm)
UC200xxxxxx EN
Printing instructions:
English 7439 2004-08
Medtronic Confidential
NeuroPatntR00
Using your patient programmer 4
48
Synchronizing and displaying
the T
HERAPY screen
Synchronizing sends the settings from your
neurostimulator to the patient programmer.
All communication with the neurostimulator
begins with synchronization.
• To synchronize your neurostimulator and
the patient programmer, hold the
programmer over your neurostimulator
and press one of the three keys shown in
Figure 4.2.
Note: Using the NEUROSTIMULATOR ON key
to synchronize, also turns ON the
neurostimulator. Using the
NEUROSTIMULATOR OFF key to synchronize,
also turns OFF the neurostimulator.