User's Manual
Table Of Contents
- 1 Introduction
- 2 Important therapy information
- 3 Introduction to stimulation
- 4 Using your patient programmer
- How the patient programmer works
- Synchronizing and displaying the Therapy screen
- Guidelines for adjusting your stimulation
- Turning your neurostimulator ON or OFF
- Adjusting stimulation settings
- Patient programmer batteries
- Summary of keys
- Preferences: Changing the audio, contrast, and number format
- Using the carrying case and labeling the patient programmer
- Optional detachable antenna
- 5 Troubleshooting
- 6 Maintenance
- 7 Appendix A: Electromagnetic interference (EMI)
221244001 Rev X
7439_Ch04.fm 10/13/04 9:29 am
Size 4.625" x 6.0" (117 mm x 152 mm)
UC200xxxxxx EN
Printing instructions:
English 7439 2004-08
Medtronic Confidential
NeuroPatntR00
Using your patient programmer 4
64
3. Hold the programmer over your
neurostimulator and press the
INCREASE or DECREASE key as
needed (Figure 4.12). The increase or
decrease occurs immediately and is
saved in the neurostimulator.
Figure 4.12 DECREASE and INCREASE keys.
Notes:
– Pressing and holding the INCREASE
or DECREASE key, changes the
value approximately every half-second.
– If one of the information screens in
Table 4.3 appears, you tried to increase
or decrease the value beyond the
available limits programmed by your
clinician.
DECREASE INCREASE