User Manual

Problem Causes and Action
The beeper does not The beeper is not on.
sound. Only the Set the Beeper Volume Control switch to low or high
Programmer Battery volume and listen to be sure it is working.
light is on.
The programmer or detachable antenna is not
aligned correctly over the neurostimulator.
Move the programmer or antenna and try again.
The programmer was removed from the
neurostimulator too soon.
Hold the programmer over the neurostimulator for at
least 1 second.
Radio signals from appliances, computers,
machinery, etc. are affecting your programmer.
Move to a different room and try again.
Remove the detachable antenna and try again.
97
9900213EN/197877_001/ccs 1/29/01 2:18 PM Page 97