User Manual

If the beeper is on, it will beep.

The lights and beeper tell you that you have lined up the

programmer and neurostimulator and they are sending signals to

each other. If only the programmer battery light is lit and the

beeper does not beep, move the programmer an inch or two and

try again.

Note: A detachable

antenna is also available.

This is helpful for patients

who cannot reach their

neurostimulator. Refer to

“Accessories“ on page 65

for more information.

Position the programmer over the

neurostimulator.

(Place against clothing or skin.)

9900213EN/197877_001/ccs 1/29/01 2:18 PM Page 42