User Manual

4. Place the programmer over your neurostimulator. Hold the

programmer flat against your skin or clothing so that the

keypad is directly over your neurostimulator.

5. Press Neurostimulator On to turn on the neurostimulator.

6. Press the Increase or Decrease key to make a change.

7. Move the Stimulation Control switch to amplitude .

8. Place the programmer over your neurostimulator. Hold the

programmer flat against your skin or clothing so that the

keypad is directly over your neurostimulator.

9. Press the Increase key to assess the change. Repeat steps 2

through 9 until the change is acceptable.

10. Replace the battery cover. (Refer to “Replacing the Battery

Cover,” page 80.)

9900213EN/197877_001/ccs 1/29/01 2:18 PM Page 59