User's Manual

Note: The programmer continues to consume a small amount of power while in Standby.
To resume from Standby, press the Power button on the side of the programmer (Figure 1 on
page 13).
Note: It may take up to 15 seconds for the programmer to resume from Standby.
Programmer Control Panel
Note: Figures showing the programmer screen are representative. What is displayed on the actual
programmer screen may differ slightly.
The Control Panel is a series of buttons that are always available at the top right of the programmer
screen (Figure 32 on page 36). The Control Panel allows monitoring and management of the overall
programmer system, including the telemetry head, network connectivity, and printer connection.
Note: Only the Control Menu and Message buttons are available while an application is loading.
Table 7. Control Panel buttons
Button Status Description
Does not display status. Press the button to access the Patient Data
Center.
See "Patient Data Center" on page 45.
Does not display status. Press the button to expand the Control Menu
("Control Menu" on page 38).
Displays the current programmer time. Press the button to open the Date and Time
window.
Printer is idle. Press the button to open the Printer Settings
window.
Printer is active.
There is a printer error.
Programmer is connected to a network via
Ethernet cable.
Press the button to open the Network window.
Wireless network is not available.
Wireless network is available.
Programmer is connected to a wireless network.
8880CW 2013-03 English 37
Filename Date Time
UC200xxxxxx EN
7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
HardwareShortManual.xsl - HardwareShortTemplate.fm
Template version: 07-06-2012
M937825A001 Rev X 2013- 03