User's Manual

Table 8. Managing the programmer system (continued)
Procedure: Do this:
Camera
To use the Camera on the back of the programmer to
capture images:
1. Press the Control Menu button.
2. Press the Utilities button.
3. Press the Camera button to open the Camera
control.
Note: For more information on the use of the Camera
control, refer to the appropriate programmer guide to see
if the Camera control is supported.
Drawing Tool
To draw lines on the active programmer screen: 1. Press the Control Menu button.
2. Press the Utilities button.
3. Press the Drawing Tool button.
Note: All functionality is disabled when the Drawing
Tool is open, except for Print Screen and Therapy
Stop (if supported by the application).
4. Press the Point Size button to select a different size
for the drawing function.
5. Press the Line button to select a different color for
the drawing function.
6. Press the Pen button to change the drawing function
to an eraser function.
7. Press the Trash button to clear the screen.
8. Press the X button to close the Drawing Tool.
Note: Any drawings on the screen will be cleared
when the Drawing Tool is closed.
View Log
To view a list of system logs for troubleshooting
purposes:
1. Press the Control Menu button.
2. Press the Utilities button.
3. Press the View Log button.
Patient Data Center
The Patient Data Center provides patient records for all patients who have had a programming session
on the programmer. The patient record includes all device and session data, as well as a Patient
Profile, which includes demographic information, notes, and imported files and images.
New patient records are created when a programming session is started and a device is interrogated.
The Patient Data Center also provides reports. Reports can be created to include data from a
particular patient session, from multiple patient sessions, or for multiple patients. Reports can be viewed
on the programmer screen, printed, sent via email, saved to a USB flash drive, or saved to a network
location. See "Reports" on page 49.
To access the Patient Data Center, press the associated button located on the Control Panel (Table 7
on page 37).
8880CW 2013-03 English 45
Filename Date Time
UC200xxxxxx EN
7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
HardwareShortManual.xsl - HardwareShortTemplate.fm
Template version: 07-06-2012
M937825A001 Rev X 2013- 03