User's Manual

Patient Record Security
Facilities should take all necessary steps to protect the patient information contained on the
programmer consistent with governmental requirements and regulations related to the protection of
such information.
If Patient Data Security is enabled, the first time the Patient Data Center is accessed after the
programmer is turned on or returns from Standby mode, the password will need to be entered.
On subsequent entries, no password is required unless the Log Off button was used to exit the Patient
Data Center. Patient Data Security options can be accessed in the Control Menu, see "Managing the
programmer system" on page 40.
Press the X button to exit the Patient Data Center and remain logged in.
Note: If the programmer loses power or is turned off, the password will need to be entered to log back
into the Patient Data Center.
Patient List
When the Patient Data Center is accessed, the Patient List, a list of all patients who have a record on
the programmer is provided (Figure 36).
The Patient List button will display the Patient List when pressed.
Figure 36. Patient List screen from the Patient Data Center.
46 English 8880CW 2013-03
Filename Date Time
UC200xxxxxx EN
7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
HardwareShortManual.xsl - HardwareShortTemplate.fm
Template version: 07-06-2012
M937825A001 Rev X 2013- 03