User's Manual

Calibrating the touchscreen
#Caution: Scratches on the touchscreen may interfere with selecting an option. If the touchscreen is
not responding appropriately, return the programmer to Medtronic for repair or replacement.
#Caution: If the touchscreen does not function as expected, the touchscreen may need to be
calibrated. Using the programmer while the touchscreen is out of calibration may result in
unintended programming or function selection.
Touchscreen calibration will increase the accuracy of the stylus pen.
To calibrate the programmer touchscreen:
1. Press the Control Menu button on the Control Panel.
2. Press the Utilities button in the Control Menu.
3. Press the Calibrate Display button in the Utilities window.
4. Press the stylus pen on the center of each target that is presented for 2 seconds.
5. Follow all instructions provided on the programmer screen.
To close the calibration function before it is compete, press the Cancel button.
Cleaning
When needed, clean the programmer and system components according to the following guidelines:
▪
Always unplug the power supply from mains electricity before cleaning.
▪
Keep liquid, including cleaning fluid, out of any openings.
▪
Do not use spray cleaner directly on the products.
▪
Do not use harsh or caustic chemical products. Use water or a mild cleanser.
▪
Clean with a soft dry or lightly dampened cloth.
Troubleshooting
For assistance or for questions about the programmer and system components, contact the appropriate
representative listed on the inside back cover of this manual.
Clinician programmer error messages
Table 11. Clinician programmer error messages
Problem Possible Solution
Serious programmer error has occurred. Report the issue to Medtronic before restarting the
programmer.
8880CW 2013-03 English 57
Filename Date Time
UC200xxxxxx EN
7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
HardwareShortManual.xsl - HardwareShortTemplate.fm
Template version: 07-06-2012
M937825A001 Rev X 2013- 03