Users Manual

152
6.2.2 Remove the Current Sensor and Disconnect the
Transmitter
1. Gently peel the adhesive pad off your skin in one continuous movement
to remove the Sensor and Transmitter.
2. Pinch the ribbed release tabs on the sides of the Sensor support mount,
and gently pull the Transmitter away from the Sensor support mount.
3. Discard the Sensor support mount and reuse the Transmitter.
Note: Do Not discard your Transmitter. It is reusable and rechargeable.
Note: Make sure that you completely disconnect the Transmitter from the
Sensor when you do. Do NOT store the Transmitter connecting a Sensor or a
USB charging cable on which may kill the Transmitter battery.
6.2.3 Charge the Transmitter
The Transmitter is charged via a USB charging cable which is plugged into a USB
2.0/3.0 port or a power adapter with a rated voltage of DC 5V and a rated
current higher than DC 1000mA. The device with the USB port and the power
adapter must comply with EN 60950-1 or EN 60601-1.
B ureau Veritas